TOOLS TO GET THE JOB DONE
DRILLING UNITS
Unit 1 2007 AMS 9700 VTR
Dimensions & Specs
Transport length: 4.25m (14′)
Transport height: 9’6”
Width: 7’2″
Mast up, stroke down: 13′ 7″
Mast up fully extended: 24′
Weight: 16000lbs
Ground Pressure: 5.3psi
Operating Ranges
Pull back force: 48000lbs
Feed stroke: 11ft
Continuous flight auger, 6in – 30 meters
Hollow stem auger, 4-1/4in – 20 meters
Auxiliary progressive cavity pump for grouting
Note: Above drilling capacities may vary according to subsurface conditions.
Unit 3 2000 AMS 9650
Dimensions & Specs
Transport length: 4.25m (14′)
Transport Height: 9’
Width: 7’2″
Mast up, stroke down: 10’9”
Mast up fully extended foot off ground: 19’
Mast up fully extended foot on ground: 15’
Weight: 16000lbs
Ground Pressure: 5.3psi
Operating Ranges
Pull back force: 48000lbs
Feed stroke: 7ft
Continuous flight auger, 6in – 30 meters
Hollow stem auger, 4-1/4in – 20 meters
Auxiliary progressive cavity pump for grouting
Note: Above drilling capacities may vary according to subsurface conditions..
Unit 30 AMS 9510 VTR
Dimensions & Specs
Transport length: 4.4m (14′)
Transport height: 2.5m
Width: 7’2″
Mast up, stroke down: 13′ 7″
Mast up fully extended: 4.5
Weight: 9400lbs
Ground Pressure: 3.2psi
Operating Ranges
Pull back force: 48000lbs
Feed stroke: 7ft
Continuous flight auger, 6in – 30 meters
Hollow stem auger, 4-1/4in – 20 meters
Auxiliary progressive cavity pump for grouting
Note: Above drilling capacities may vary according to subsurface conditions.
Unit 4 Drill Truck with SPT Hammer
Dimensions & Specs
Operating Ranges
Pull back force:
Feed stroke: 13 ft
Continuous flight auger, 6in – 30 meters
Hollow stem auger, 4-1/4in – 20 meters
Unit 23 Drill Truck
Dimensions & Specs
Deck width: 8’2”
Total length: 25’
Mast height min: 19’
Mast height fully extended: 24’2”
Weight 12,000 (5,400kg)
Ground pressure 31PSI
Operating Capacity
Feed Stroke: 3m (10ft)
6 Inch continues flight augers 20 meters
Pull back force 40,000LBS
Unit 18 2007 Morooka MST800 with 2007 Mobile B-53 Drill
Dimensions & Specs
Transport length 8 meters (26’3”)
Width 2.5 meters (8’3”)
Mast up 9.15 meters (30’)
Mast down transport height 3 meters (9’10”)
Weight 9,900kg
4.20 pounds per square inch ground pressure
Operating Ranges
Pulldown force: 31,400 lbs (14,242 kg)
Retract force: 24,000 lbs (10,886.2 kg)
Feed stroke: 78 in (1.98 m)
Torque: 8,600 ft-lbs (11,660 Nm)
Continuous Flight Auger, 6 in (152 mm) OD: 300 ft (91.44 m)
Hollow Stem Auger, 3-1/4 in (108 mm) ID: 150 ft (45.72 m)
Note: Above drilling capacities may vary according to subsurface conditions.
Winch 1 Capacity: 8,500 lbs (3,855.5 kg(
Winch 2 & 3 Capacity: 4,500 lbs (2,041kg)
ASTM D-1586 SPT hammer with 140 lb slug
250 Gallon water tank
Progressive cavity pump.
Unit 36 2014 Mobile B48
Dimensions & Specs
Transport length 23ft
Width 8ft
Mast up 25ft
Mast down transport height 9ft
Weight 9,900kg
4.20 pounds per square inch ground pressure
Operating Ranges
Pulldown force: 11,700 lbs (5307 kg)
Retract force: 15,700 lbs [7,121.4 kg]
Feed stroke: 6 ft [1.83 m]
Torque: 8,600 ft-lbs (11,660 Nm)
Continuous Flight Auger, 6 in (152 mm) OD: 300 ft (91.44 m)
Hollow Stem Auger, 3-1/4 in (108 mm) ID: 150 ft (45.72 m)
Rotary Drilling: NW drill rod to 1,500 ft [457 m]
Note: Above drilling capacities may vary according to subsurface conditions.
Winch 1 Capacity: 8000 lbs
Winch 2 Capacity: 4500 lbs
ASTM D-1586 SPT hammer with 140 lb slug
200 Gallon water tank
Progressive cavity pump.
Unit 25 Skid Steer Drill
Dimensions & Specs
Total Length 14’ (4.3 m)
Width 75” (190 cm)
Height mast up 13’ (4 m)
Weight 14,000lbs (6,350 kg)
5.5 pounds per square inch ground pressure
Operating Ranges
Field stroke 11’ (3.4 m)
Pullback force – 15,000 lbs (6,804 kg)
Best suited for small Phase Two programs up to 6 m (19.7′) depth.