EQUIPMENT
SAFE AND ECONOMICAL
TOOLS TO GET THE JOB DONE
Our Equipment
DRILLING UNITS
Unit 1 2007 AMS 9700 VTR
Dimensions & Specs:
- Transport length: 4.25m (14′)
- Transport height: 9’6”
- Width: 7’2″
- Mast up, stroke down: 13′ 7″
- Mast up fully extended: 24′
- Weight: 16000lbs
- Ground Pressure: 5.3psi
Operating Ranges:
- Pull back force: 48000lbs
- Feed stroke: 11ft
- Continuous flight auger, 6in – 30 meters
- Hollow stem auger, 3-1/4in – 20 meters
- Auxiliary progressive cavity pump for grouting
- Note: Above drilling capacities may vary according to subsurface conditions.
Unit 2 Sterling Acterra Drill truck
Dimensions & Specs:
- Total length: 28’
- Width: 8’6”
- Height 24’6”
- Weight 23,000lbs (10,500KG)
- Ground Pressure 42 PSI
- Operating Ranges:
Operating Capacities
- Atlas SPT hammer with 140lb slug
- 5000lb winch
- 8000lb winch
- 24,000lb Pull back force
- 6 inch solid stem augers 30 meters
- 3-1/4 hollow stem augers 20 meters
Unit 3 2000 AMS 9650
Dimensions & Specs:
- Transport length: 4.25m (14′)
- Transport Height: 9’
- Width: 7’2″
- Mast up, stroke down: 10’9”
- Mast up fully extended foot off ground: 19’
- Mast up fully extended foot on ground: 15’
- Weight: 16000lbs
- Ground Pressure: 5.3psi
Operating Ranges:
- Pull back force: 48000lbs
- Feed stroke: 7ft
- Continuous flight auger, 6inch – 30 meters
- Hollow stem auger, 3-1/4in – 20 Meters
- Note: Above drilling capacities may vary according to subsurface conditions.
Unit 4 2019 Ford F-550 Drill truck
Dimensions & Specs:
- Deck width: 8’2”
- Total length: 25’
- Mast height min: 19’
- Mast height fully extended: 24’2”
- Weight 12,000 (5,400kg)
- Ground pressure 31PSI
- Operating Ranges:
Operating Capacity:
- Feed Stroke: 3m (10ft)
- 6 Inch continues flight augers 20 meters
- Pull back force 40,000LBS
Unit 18 2007 Morooka MST800 with 2007 Mobile B-53 Drill
Dimensions & Specs:
- Transport length 8 meters (26’3”)
- Width 2.5 meters (8’3”)
- Mast up 9.15 meters (30’)
- Mast down transport height 3 meters (9’10”)
- Weight 9,900kg
- 4.20 pounds per square inch ground pressure
Operating Capacity:
- Pulldown force: 31,400 lbs [14,242 kg]
- Retract force: 24,000 lbs [10,886.2 kg]
- Feed stroke: 78 in [1.98 m]
- Torque: 8,600 ft-lbs [11,660 Nm]
- Continuous Flight Auger, 6 in [152 mm] OD: 300 ft [91.44 m]
- Hollow Stem Auger, 3-1/4 in [108 mm] ID: 150 ft [45.72 m]
- Note: Above drilling capacities may vary according to subsurface conditions.
- Winch 1 Capacity: 8,500 lbs [3,855.5 kg]
- Winch 2 & 3 Capacity: 4,500 lbs (2,041kg)
- ASTM D-1586 SPT hammer with 140 lb slug
- 250 Gallon water tank
- Progressive cavity pump
Unit 25 Skid Steer Drill
Dimensions & Specs:
- Total Length 14’ (4.3 m)
- Width 75” (190 cm)
- Height mast up 13’ (4 m)
- Weight 14,000lbs (6,350 kg)
- 5.5 pounds per square inch ground pressure
Operating Capacity:
- Field stroke 11’ (3.4 m)
- Pullback force – 15,000 lbs (6,804 kg)
- Best suited for small Phase Two programs up to 6 m (19.7′) depth
SUPPORT EQUIPMENT
Unit 10 Enclosed Trailer
- 19’ total body length
- Rental includes generator
- Includes seating, desk space, heater, sliding windows, barn doors, sink, additional cabinets for supply storage, whiteboard, lights
- Comes fully equipped with all standard safety kits
Great for:
- Field screening in cold weather
- Using as a mobile command station
- Housing critical safety kits (spill kits, first aid, fire extinguisher)
- Break area
- Muster point
Unit 12 Enclosed Trailer
- 19’ total body length
- Rental includes generator
- Includes seating, desk space, heater, sliding windows, lights
- Comes fully equipped with all standard safety kits
Great for:
- Field screening in cold weather
- Using as a mobile command station
- Housing critical safety kits (spill kits, first aid, fire extinguisher)
- Break area
- Muster point
Unit 15 International 7500 HT570
- GVW: 10000kg
- Tare: 24500kg
- 8000lb deck winch
- Differential lock